Digitalization of Building Technology

OAS SBS JACE 8N4 BACnet® Automation platform

The open and high-performance automation and integration platform based on Niagara Framework® N4. For OAS system partners.

Learn More

SBS IOM (Modbus) I/O Feldbusmodule

The open Modbus I/O system

The OAS-SBS-IOM series consists of compact fieldbus modules with inputs and outputs for DIN rail mounting, on the mounting plate in the control cabinet or electrical distribution board, or in a 19" rack, for door mounting.

Open, compact, convenient

Slim, intelligent and standardized is the series of SBS IOM fieldbus modules from OAS. This consists of compact fieldbus modules with inputs and outputs for analog and digital signals. The fieldbus modules acquire the signals of the building services equipment and pass them on to the controllers. Due to the standardized communication via Modbus, no further gateways are required.

Mehr erfahren

[Translate to Englisch:] OAS-SBS-IOM-1021

OAS-SBS-IOM-1021

Analog inputs
 

8 analog inputs: 8 AI module (active/passive), 8 x status LED

The SBS analog input module for the connection and signaling of up to eight analog values. Active signals (0...10V) and various passive sensors (e.g. Pt1000, Ni1000) can be connected. 

[Translate to Englisch:] OAS-SBS-IOMR-1022

OAS-SBS-IOMR-1022

Analog outputs
 

8 analog outputs: 8 AO module (0..10V), 8 x Auto-Hand Poti

Analog output module for the output of eight 0...10 V control signals. With the help of the switches and potentiometers a so called local priority operation (LVB) can be realized.

[Translate to Englisch:] OAS-SBS-IOM-1023

OAS-SBS-IOM-1023

Digital / binary inputs
 

16 digital- binary inputs: 16 DI- module (24V), 16 x LED status red / green

Digital input module for connection and signaling of up to 16 messages. The digital inputs can be used as counters.

[Translate to Englisch:] OAS-SBS-IOMR-1024

OAS-SBS-IOMR-1024

Relay outputs
 

8 digital outputs 3A: 8 DO- module relay outputs

Digital output module with relay outputs 230 V / 3 A in two groups, for controlling eight drives or similar, LVB realization by means of slide switch.

[Translate to Englisch:] OAS-SBS-IOMR-1025

OAS-SBS-IOMR-1025

3- point relay outputs

2x 3-point relay outputs: 2x 3-point DO-/ 4x DI module

Digital output module with 2 x 3-point relay outputs 230 V / 3 A in two groups, for controlling 2 OPEN - STOP - CLOSE drives such as valves, dampers, shutters. Venetian blinds or similar.

LVB realization by means of slide switch. 2 x Auto-Off -Man (manual) switches, 2 x OPEN - STOP - CLOSE - switches.

Parameters such as running times, emergency position, etc. can be conveniently set via the NIAGARA N4-based OAS I/O WEB module configurator. The parameters are also available as exposed Modbus registers.

Tridium JACE 8000® BACnet® Automation platform 

The open and high-performance automation and integration platform based on Niagara Framework® N4. 

Learn More

JACE 8000® - I/O Module IO R 34

34 I/O points module (IO-R-34)
16 universal inputs:
- Type-3 temperature sensor (10 K),
- 0-100 kOhm,
- 0-10 V DC,
- 0-20 mA with external resistor
10 relay outputs (A-contacts, 24 V AC at 0.5 A)
8 analog outputs (0-10 V DC)

Learn More

JACE 8000® - I/O Module IO R 16

16 I/O points module (IO-R-16)
8 universal inputs:
- Type-3 temperature sensor (10 K),
- 0-100 kOhm,
- 0-10 V DC,
- 0-20 mA with external resistor
4 relay outputs (A-contacts, 24 V AC at 0.5 A)
4 analog outputs (0-10 V DC)

Learn More

Niagara EDGE 10 BACnet®  I/O Controller

IP-based IO controller, based on Niagara Framework N4.

- 5 universal inputs
- 3 digital outputs
- 2 analog outputs
- 1 serial 485 port
- 2 Ethernet ports

Learn Moren